BanabaB 5L Druckluft Bremsentlüfter Bremsenentlüftungsgerät Bremsen Entlüftungsgerät Pneumatischer Bremsentlüfter Werkzeugsatz für Bremsentlüftungsgerät

Feature
A hand pump allows the suction of the brake fluid through the venting nipple without the brake pedal
Pressure reducer with safety valve
container made of steel chromed
Filling hose made of polyurethane, fabric-reinforced
Adapter set diverse adapter with the same diameter but with different thread pitches
Liquid container
Switchable, 2 functions: overpressure (pressure) or negative overpressure (vacuum)
For bleeding brake systems, checking pressure systems
Vacuum pump also available separately
End switch physically / technically controlled, no pressure build-up when empty
Automatic pressure relief after switching off the device, unpressurized removal of the adapter on the vehicle balance tank
Pneumatic brake breathing apparatus
Transparent brake breather hose for visual inspection

Specifications
Working air pressure: 10-40 PSI
Air-consumption: 4.5 CFM at 30 PSI
Air inlet: 1/4"
Tank capacity: 1.3 gallonen (5L)
Pressure regulator: manual control dial, locking
Pressure gauges: 0-150 PSI, 20 PSI increments; within the 20 PSI increments, marked in 2 psi increments
Drain tubes: 2-12-1/2" x 0.316"(dia.)
Brake fluid filler hose: 6.9"(L) x 0.236" (dia.)
Collection bottle: 2-9" x 4-3/4" x 2-1/4"; 0.26 gallon (one quart)

Package
1 X Handle bar
1 X Cap, tank
1 X Tank, upper half
1 X Rubber membrane
1 X Tank, lower half
1 X Connector, PL802L
1 X Hose, air inlet
1 X Connector, quick
3 X Valve, ball, 1/4"
1 X Valve, pressure adjust
2 X Connector
1 X Valve, safety, air release
1 X Connector
1 X Tube
1 X Connector, quick fluid
1 X Hose, fluid
1 X Strain relief, hose
1 X Coupler
1 X Gauge, pressure
1 X Coupler, pressre gauge